Project Description
Solenoid valve ZEP
- 2/2 NC cl.A
- membrane, assisted lift
- suited to zero pressure differential conditions (ΔPMIN= 0 bar)
- conforms to PN-EN161
- designed for reliable service in all types of installations and appliances supplied from low and medium pressure gas network
- in air installations
- in non-aggressive gases installations
- pneumatic control systems
| Fluid media | Gas fuels, air and other non-aggressive gases |
| Pressure | Gas fuels, air and other non-aggressive gases |
| Fluid media temperature | -10°C ÷ +60°C |
| Ambient temperature | -10°C ÷ +60°C |
| Voltage | AC(50Hz) 24V, 110V, 230V; DC 12V, 24V |
| Power | 15W ÷ 38W (w zależności od typu) |
| Closing time | <1s |
| Operation type | Continuous (100%) |
| Degree of protection | IP54 |
| Valve body material | Brass |
| Sealing material | Nitrile-butadiene rubber NBR |
| Mounting position | coil upwards -acceptable deviation from vertical position up to 90O |
| Typ | Dn | Rp | A [mm] |
B [mm] |
E* [mm] |
L [mm] |
PMAX [bar] |
ΔP [bar] |
M [kg] |
|---|---|---|---|---|---|---|---|---|---|
| Threaded connection | |||||||||
| ZEP-20 | 20 | 3/4 | 143 | 20 | 69/66** | 113 | 10 | 0/10 | 2,60 |
| ZEP-25 | 25 | 1 | 143 | 20 | 69/66** | 113 | 10 | 0/10 | 2,44 |
** – valve width without coil
- suited to applications where pressure differential ΔP fluctuates or is very hard to define
- they work properly regardless of the differential pressure ΔP on the valve – although they use process pressures for operation
- they can be used from zero to the maximum PMAX operating pressure on which they have been designed
- have relatively high flow resistance (low Kv) – design considerations
- are sensitive to contamination – proper purity of the medium fluid should be ensured (filters application)
- long actuation times – low connecting frequency
- lifespan – less than for direct acting valves (several hundred of thousand work cycles)
